Crystalline Waterproofing

Approx. Rs 5,040 / KgGet Latest Price

Product BrochureService Details:

Description

Penetron Admix® (Integral Crystalline WaterproofingAnd Durability Admix) Is Added To The Concrete Mix At TheTime Of Batching. Penetron Admix®'s Various Active,Proprietary Chemicals React With The Moisture In FreshConcrete And With The By-products Of Cement HydrationTo Cause A Catalytic Reaction Generating A Non-solubleCrystalline Formation Throughout The Pores And CapillaryTracts Of The Concrete. Thus, The Concrete BecomesPermanently Sealed Against The Penetration Of Water OrLiquids From Any Direction. The Concrete Is Also ProtectedFrom Deterioration Due To Harsh Environmental Conditions.Penetron Admix® Has Been Specially Formulated ToMeet Varying Project And Temperature Conditions (SeeSetting Time And Strength). Consult With A PenetronTechnical Representative For Additional Detailed Support on Your Project.

Advantages

Resists Extreme Hydrostatic Pressure From EitherPositive Or Negative Surface Of The Concrete SlabBecomes An Integral Part Of The ConcreteHighly Resistant To Aggressive ChemicalsCan Seal Hairline Cracks Up To 1/51" (0.5 Mm)Allows Concrete To BreatheNon-toxic (Nsf 61 Certified For Potable Water Applications)Less Expensive Than Traditional MethodsPermanentAdded To The Concrete At The Time Of Batching AndTherefore Not Subject To Climatic RestraintsReduces Construction Scheduling TimeImproves Durability Of ConcretePermeability Reducing Admixture For HydrostaticConditions (Prah)Zero Voc – Penetron Powdered Products Contain ZeroVolatile Organic Compounds And Are Safe For Use BothOutdoors And In Confined Indoor SpacesExceeds Requirements Of Astm C494-s (SpecificPerformance 
Admixtures.

Directions For Use

Dosage Rate:Powder: 0.8-1.0% By Weight Of Cementing Materials. Consult With Penetron'sTechnical Department For Assistance In Verifying The Appropriate Dosage RateAnd For Further Information Regarding Enhanced Chemical Resistance AndOptimum Concrete Performance For Your Project.Liquid: Add 16 Ounces Of Penetron Admix® Liquid For Every 100 Lb OfCementing Materials (1.0 L Of Penetron Admix® Liquid For Every 100 Kg OfCementing Materials). Consult With Penetron's Technical Department ForFurther Information Regarding Enhanced Chemical Resistance And OptimumConcrete Performance For Your Project.Mixing:Powder: Penetron Admix® Powder Must Be Added To The Concrete At TheTime Of Batching.The Sequence Of Procedures For Addition Will Vary According To The Type OfBatch Plant Operation And Equipment. The Following Are Some Typical MixingGuidelines. For More Detailed Information On Dosing Procedures, ContactYour Penetron Representative.Ready Mix Plant - Dry Batch Operation: Add Penetron Admix® In PowderForm To The Drum Of The Ready-mix Truck. Drive The Truck Under The Batch PlantAnd Add 60%-70% Of The Required Water, Along With 300-500 Lb (136-227 Kg) OfAggregate. Mix The Materials For 2-3 Minutes To Ensure The PenetronAdmix® Is Distributed Evenly Throughout The Mix Water. Add The Balance OfMaterials To The Ready-mix Truck In Accordance With Standard BatchingPractices.Ready Mix Plant - Central Mix Operation: Mix Penetron Admix® With WaterTo Form A Very Thin Slurry (E.g. 40 Lb (18 Kg) Of Powder Mixed With 6 Gallons(22.7 L) Of Water). Pour The Required Amount Of Material Into The Drum Of TheReady-mix Truck. The Aggregate, Cement, Sand And Water Should Be BatchedAnd Mixed In The Plant In Accordance With Standard Practices (Taking IntoAccount The Quantity Of Water That Has Already Been Placed In The Ready-mixTruck). Pour The Concrete Into The Truck And Mix For At Least 5 Minutes ToEnsure Even Distribution Of Penetron Admix® Throughout The Concrete.Precast Batch Plant: Add Penetron Admix® In Powder Form, To The Rock AndSand, Then Mix Thoroughly For 2-3 Minutes Before Adding The Cement