Waterproof Coatings

Approx. Rs 3,080 / KgGet Latest Price

Product BrochureService Details:

CICO TAPECRETE RTU is a two pack polymer modified cementitious elastomeric protective and waterproof coating. When it hardens it develops excellent bonding property to most building materials. It is suitable in both interior and exterior building and all other civil engineering applications. Cured film of CICO TAPECRETE RTU prevents dampness in buildings tanks, roofs and other concrete structures permanently. 

Approx. Rs 2,550 / Bucket of 10 LitreGet Latest Price

Product BrochureService Details:

Description Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.

Typical Applications } For concrete repairs - Spalled concrete of floors, columns, beams, chajja, slabs, parapets, etc. } For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chajja & lift pits, balconies. } As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering. } For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding. } As external rendering – Weatherproof & frost resistant render. } As bonding slurry coat for pinhole treatment on concrete surface

Features } Multipurpose – It is multipurpose & economical product, easy to use. } Cracking – It prevents cracking by improving flexural strength. } Hardness – Improves the hardness & prevents dust generation. } Shrinkage – Reduces drying & aging shrinkage cracks. } Bonding – Bonds strongly to concrete, masonry, stonework, plasters, cementitious surfaces. } Erosion & corrosion – Improves erosion resistance & prevents corrosion. } Abrasion resistance – Improves abrasion resistance of the cement mix. } Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding

Approx. Rs 1,950 / LitreGet Latest Price

Product BrochureService Details:

Approx. Rs 725 / BagGet Latest Price

Product BrochureService Details:

Note Allow a minimum of 24 hours for the subsequent usage of the tile fixed areas. Do not tile if temperature is likely to drop to below 5°C or exceed 50°C. For temperature below 20°C allow the adhesive to cure for an extended period of time. Pot life, open time and adjusting time depends on the surface absorption, wind factor, temperature, humidity conditions at site The technical data provided in this technical data sheet is as per our internal lab testing and may vary as per the actual method of application at sites Consult UltraTech Building Products Division Technical Services Cell for any further technical assistance Safety Directions UltraTech TILEFIXO YT is non-toxic. Use of gloves and goggles recommended. Any splashes to the skin or eyes should be washed off with clean water immediately In case of prolonged irritation, medical advice should be sought. UltraTech TILEFIXO YT is non-f

Approx. Rs 530 / BagGet Latest Price

Product BrochureService Details:

Prepare the surfaces before the Tile adhesive application by removing oil, bond inhibiting agents, dirt,dust and laitance. The cleaning can be carried out with suitable methods like by using wire brush,water jetting, mopping, etc.● UltraTech BASEKRETE is recommended over vertical surfaces and UltraTech FLOORKRETE forhorizontal floor areas to level the surface in case of higher undulations or for any repair works toattain the flat, stable and normal absorption background prior to UltraTech TILEFIXO-VT application● UltrUltraTech TILEFIXO-VT requires 25% of water by weight of material (4 parts of tile adhesive and1 part water)● Mix UltraTech TILEFIXO-VT to the measures quantity of water using mechanical stirring for 2-3minutes to ensure a consistency free of lumps● Allow to stand for 2 minutes for the mix to mature and then remix to use● Do not add any extra water to alter the mix consistency or to extend the pot life. Further wateradditions will hamper the adhesion strength of the Tile Adhesive● Apply the mixed UltraTech TILEFIXO-VT to the prepared substrate using the appropriate notchedtrowels for the size of the tiles being laid● A minimum of 3 mm bed thickness of Tile Adhesive for walls and floors must be achieved● Lay tiles onto the adhesive, firmly press the tile on to the adhesive to ensure good initial bonding, anddo not disturb tiles until the adhesive has set● No pre-wetting of tiles is required while using UltraTech TILEFIXO-VT● It is recommended to fix the tiles within 30 minutes of spreading of UltraTech TILEFIXO-VT toachieve the adequate bonding as per the Technical data provided● Any tile fixing after 30 minutes will lead to improper adhesion and may result in de-bonding of tiles● For vertical area applications, tiling should start from bottom to top● For tile-on-tile, tile-on-mosaic, tile-on-old cement floor application, care should be taken to preparethe existing base with adequate interlocking friction effect by removing polish/wax/top smooth layers

Approx. Rs 5,200 / PieceGet Latest Price

Product BrochureService Details:

TRUBUILD ROOFTECT ADVANCED is a single component waterproofing system with unique PU-Acrylate based formulation which provides excellent barrier against water and heat. It forms a seamless waterproofing membrane which has excellent elongation with good crack bridging capacity, excellent reflectance properties. Hence it forms exceptional waterproofing coating system with good durability.

Approx. Rs 3,700 / KgGet Latest Price

Product BrochureService Details:

Service Details: